AGIR Habrok 38 wing

• The AGIR Habrok 38 is a single bladder 38 lbs´ (190 N) lift wing. The outer shell is made of 1000 denier Cordura (rugged ballistic nylon). Its inner bladder is manufactured from ultrasonically welded 400 denier Cordura, a puncture-resistant material - originally designed for flotation devices.
• The centre position inflator has a reinforced mounting hole with a 14” long corrugated hose. The low pressure hose is 24” long to simplify use with a variety of first stage positions. Both the elbow and inflator assembly can be adjusted for optimum positioning. Please contact your AGIR dealer for advice.
• The inflator does not have a pull-dump. The inflators minimum working pressure is 6 bar and its maximum working pressure is 34 bar.
• The overpressure- / dump valve (OPRV) is on the lower left side of the wing.
• The valve is equipped with a 6” long, 3 mm thick nylon cord.
• The Habrok 38 wing -, its inflator and OPRV have been built to handle diving in cold, arduous conditions.
• The Habrok 38 wing has comparatively straight sides to enhance diver trim.
• The Habrok 38 wing can be adjusted in three different positions, which assists in optimising trim whilst venting excess gas.
• The OPRV may be used for adjustment of buoyancy when in horizontal position, reducing the need for diver movement.
• The AGIR Habrok 38 wing is designed to be used with AGIR backplate and harness. With the AGIR backplate, the Habrok 38 wing is better protected against wear, as its seams follow the outline and design of the backplate. This reduces the contact between the Cordura fabric and the AGIR steel or aluminium backplate.